ZyXEL Communications GS1920v2 Series User Manual page 51

Table 7 Navigation Panel Links (continued)
L INK DESC RIPT IO N
IPv6 This link takes you to a screen where you can view IPv6 status and configure IPv6 settings.
DNS This link takes you to a screen where you can configure DNS (domain name server) IP
addresses.
Cloud This screen displays a link to a screen where you can enable or disable the
Management
C o ntro l Disc o ve ry
Control Center). Another link takes you to a
code containing the Switch's serial number and MAC address for handy registration of the
Switch at NCC.
Advanced Application
VLAN This link takes you to screens where you can configure port-based or 802.1Q VLAN (depending
on what you configured in the Switch Setup menu). You can also configure a protocol based
VLAN or a subnet based VLAN in these screens.
Static MAC This link takes you to a screen where you can configure static MAC addresses for a port. These
Forwarding static MAC addresses do not age out.
Static Multicast This link takes you to a screen where you can configure static multicast MAC addresses for
Forwarding port(s). These static multicast MAC addresses do not age out.
Filtering This link takes you to a screen to set up filtering rules.
Spanning Tree This link takes you to screens where you can configure the RSTP/MRSTP/MSTP to prevent
Protocol network loops.
Bandwidth This link takes you to a screen where you can configure bandwidth limits on the Switch.
Control
Broadcast Storm This link takes you to a screen to set up broadcast filters.
Control
Mirroring This link takes you to screens where you can copy traffic from one port or ports to another port
in order that you can examine the traffic from the first port without interference.
Link Aggregation This link takes you to screens where you can logically aggregate physical links to form one
logical, higher-bandwidth link.
Port This link takes you to a screen where you can configure IEEE 802.1x port authentication for
Authentication clients communicating via the Switch.
Port Security This link takes you to screens where you can activate MAC address learning and set the
maximum number of MAC addresses to learn on a port.
Time Range This link takes you to a screen where you can define different schedules.
Classifier This link takes you to screens where you can configure the Switch to group packets based on
the specified criteria.
Policy Rule This link takes you to a screen where you can configure the Switch to perform special treatment
on the grouped packets.
Queuing Method This link takes you to a screen where you can configure queuing with associated queue
weights for each port.
Multicast This link takes you to screens where you can configure various multicast features, IGMP
snooping, MLD snooping-proxy and create multicast VLANs.
AAA This link takes you to a screen where you can configure authentication, authorization and
accounting services via external servers. The external servers can be either RADIUS (Remote
Authentication Dial-In User Service) or TACACS+ (Terminal Access Controller Access-Control
System Plus).
IP Source Guard This link takes you to screens where you can configure filtering of unauthorized DHCP and ARP
packets in your network.
Loop Guard This link takes you to a screen where you can configure protection against network loops that
occur on the edge of your network.
Layer 2 Protocol This link takes you to a screen where you can configure L2PT (Layer 2 Protocol Tunneling)
Tunneling settings on the Switch.
Chapter 4 The Web Configurator
feature. If it's enabled, you can have the Switch search for the NCC (Nebula
GS1920v2 Series User's Guide
51
screen which has a QR
Ne b ula Switc h Re g istra tio n
Ne b ula C e nte r