Table of Contents
Advertisement
Advanced Application > Multicast > MVR
Fig ure 157
The following table describes the related labels in this screen.
Table 91 Advanced Application > Multicast > MVR
L ABEL
DESC RIPT IO N
Active
Select this check box to enable MVR to allow one single multicast VLAN to be shared among
different subscriber VLANs on the network.
Group Name
Enter a descriptive name (up to 32 printable ASCII characters) for identification purposes.
Multicast VLAN ID
Enter the VLAN ID (1 to 4094) of the multicast VLAN.
802.1p Priority
Select a priority level (0-7) with which the Switch replaces the priority in outgoing IGMP or MLD
control packets (belonging to this multicast VLAN).
Mode
Specify the MVR mode on the Switch. Choices are
Select
VLAN.
Select
Port
This field displays the port number on the Switch.
Chapter 24 Multicast
to send IGMP reports or MLD messages to all MVR source ports in the multicast
Dyna m ic
to set the Switch not to send IGMP reports or MLD messages.
C o m pa tib le
GS1920v2 Series User's Guide
219
and
.
Dyna m ic
C o m pa tib le
- Quick Links:
- Management Modes
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
