Lldp-Med Location - ZyXEL Communications GS1920v2 Series User Manual

The following table describes the labels in this screen.
Table 142 Advanced Application > LLDP > LLDP-MED Network Policy
L ABEL
Port
Application Type
Tag
VLAN
DSCP
Priority
Add
Cancel
Index
Port
Application Type
Tag
VLAN
Priority
DSCP
Delete
Cancel
33.9 L L DP- MED L o c a tio n
Click
Adva nc e d Applic a tio n
next.
Chapter 33 Link Layer Discovery Protocol (LLDP)
DESC RIPT IO N
Enter the port number to set up the LLDP-MED network policy.
Select the type of application used in the network policy.
• vo ic e
• vo ic e - sig na ling
• g ue st- vo ic e
• g ue st- vo ic e - sig na ling
• so ftpho ne - vo ic e
• vide o - c o nfe re nc ing
• stre a m ing - vide o
• vide o - sig na ling
Select to tag or untag in the network policy.
• tagged
• untagged
Enter the VLAN ID number. It should be from 1 to 4094. For priority tagged frames, enter "0".
Enter the DSCP value of the network policy. The value is defined from 0 through 63 with the 0
representing use of the default DSCP value.
Enter the priority value for the network policy.
Click Add after finish entering the network policy information. A summary table will list all the
Switch you've added.
Click Cancel to begin entering the information afresh.
This field displays the of index number of the network policy. Click an index number to edit
the rule.
This field displays the port number of the network policy.
This field displays the application type of the network policy.
This field displays the Tag Status of the network policy.
This field displays the VLANID of the network policy.
This field displays the priority value of the network policy.
This field displays the DSCP value of the network policy.
Select an entry's check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Check the rules that you want to remove, then click the
Click to clear the selected check boxes.
C a nc e l
>
L L DP > L L DP- MED L o c a tio n (C lic k He re )
GS1920v2 Series User's Guide
304
button.
De le te
to display the screen as shown