51.3 Switc h C o nfig ura tio n
I lost my configuration settings after I restarted the Switch.
Make sure you save your configuration into the Switch's
nonvolatile memory each time you make changes.
Click
at the top right corner of the web configurator to save the configuration permanently. See
Sa ve
also
Section 39.2.2 on page 341
I accidentally unplugged the Switch. I'm not sure which configuration file will be loaded.
If you plug the power cable back to the Switch, it'll reboot and load the configuration file that was used
the last time. For example, if
Switch,
C o nfig 1
Chapter 51 Troubleshooting
for more information about how to save your configuration.
was used on the Switch before you accidentally unplugged the
C o nfig 1
will be loaded when rebooting.
GS1920v2 Series User's Guide
401