(b) Detaching the riser unit
1. Referring to Figure 5-4, loosen and remove the screw fixing the riser unit in the
back of the Equipment.
2. Referring to Figure 5-5, hook your fingers in the grills on top of the riser unit.
Then, while holding down the Equipment by the other hand, pull out the riser
unit slowly and vertically.
< NOTE >
When you reattach the riser unit, also refer to Figure 5-6.
Figure 5-4 Removing the Screw Fixing the Riser Unit on HJ-2035
Figure 5-5 Detaching the Riser Unit on HJ-2035
5. INSPECTION AND MAINTENANCE
Riser unit
5-11