(d) Inserting an extended board
Insert an extended board into the target slot by pushing both ends of the board
directly from above. Then, insert the extended board completely by pushing its
connector part directly from above. Finally, fix the extended board to the Equipment
with the screw removed in the previous step.
When you finish all of these actions, restore the low-profile bracket and the cover of
the Equipment by reversing the order of detachment.
< NOTE >
Be sure to preserve the stopping panel removed as a result of inserting an extended
board.
When an extended board is inserted, the adjacent board may loosen. Ensure that
the adjacent board is firmly fixed.
Target extended
board connector
Figure 5-11 Inserting an Extended Board on HJ-2030
5. INSPECTION AND MAINTENANCE
Slot earthing
leaf spring
5-17