Table of Contents
Advertisement
7. MAINTENANCE ACTIONS
OUTPUT FORMAT
< NOTE >
Errors in acquiring certain information may cause the results to include section titles
without content or content fields filled with "---" due to error. In such a case, execute
the getrasinfo command again.
Shown below is a sample output image after executing the getrasinfo command
without specifying parameters, followed by the explanation on the content.
Sample output image
<<getrasinfo result>>
Date: 2011/07/30 17:28:30
Computer Name: HF-W2000 Model35
[Hardware Status]
[Fan condition]
PS fan status:
CPU fan status:
[Temperature condition]
Internal temperature status:
Internal temperature value:
[RAID condition]
Array1
Status:
RAID level:
[Drive condition]
Drive bay1
Status:
Used hours:
Drive bay2
Status:
Used hours:
[Memory condition]
DIMM A status:
DIMM B status:
*1 Content of "Computer Name" field in the header depends on the model type of the Equipment.
*2 The [RAID condition] in "Hardware Status" section is displayed on D Model and B Model.
* Model
Normal
Normal
Normal
28 deg C
Optimal
1
Healthy
2000 hours
Smart Detected
5 hours
Normal
Error
7-26
Header (*1)
Hardware Status section
(Equipment status) (*2)
(Continued on next page)
Advertisement
Table of Contents
