3.6 DVD Drive
When you finish accessing a DVD disk, remove it from the DVD drive.
Leaving a DVD disk in the DVD drive may cause a failure.
If the disk tray is left opened, a failure may be caused. When the DVD drive
is not used, store the disk tray in the DVD drive.
Do not use DVD disks having eccentricity of the center of gravity (e.g., due to
labels), cracks, scratches, bends, or extraordinary shapes. Otherwise,
abnormal noise, vibration, or machine failure may result.
3.6.1 Inserting DVD disk
1. Press the eject button gently to open the disk tray.
2. Set a DVD disk with label facing up onto the disk tray.
3. Push the disk tray in, and the disk tray enters into the DVD drive.
DVD disk tray
3.6.2 Removing DVD disk
1. Confirm that the lamp is not on or blinking (operating).
2. Press the eject button gently to open the disk tray.
3. Take out the DVD disk from the disk tray.
4. Push the disk tray in.
Front view of the Equipment (disk tray opened)
Lamp
Front view of DVD drive
Figure 3-1 Front View of DVD Drive in the Equipment
NOTICE
Eject button
Manual emergency eject hole
3-5
3. OPERATION