Table of Contents
Advertisement
3. In the left pane of the "Intel® Graphics and Media Control Panel" window, click
Display and then click General Settings. In the right pane, ensure selection of the
target display unit from Display list, and then set up Resolution, Color Depth, and
Refresh Rate to your preference from the relevant lists.
< NOTE >
Do not change Rotation and Scaling settings.
Select Refresh Rate value from those listed in Section 4.1 (2).
4. When you finish the setting changes, click OK button. If the changes include
resolution or refresh rate, a confirmation dialog below will appear. In such a case,
click OK button in the dialog to keep the setting change.
< NOTE >
Resolution options selectable by default include resolution values beyond the limit
supported by the connected display unit. If you inadvertently select a resolution value
exceeding the said limit, the display unit will stop showing the display image. Since
the default resolution value after the video driver installation is automatically set to the
maximum of those supported by the connected display unit, be sure to specify a
smaller value when you change the resolution from the default.
3-25
3. OPERATION
Advertisement
Table of Contents
