Inserting/Extracting Extended Board On Hj-2035; Figure 5-3 Unmounting The Cover Of The Equipment - Hitachi HF-W2000 35 User Manual

5. INSPECTION AND MAINTENANCE

5.4.1.3 Inserting/extracting extended board on HJ-2035

 Do not insert your fingers inside the cover of the Equipment when you
reattach it. Otherwise, you may pinch your fingers.
 Pay attention not to get your fingers injured by protrusions in the back of the
Equipment.
(1) Inserting an extended board
(a) Unmounting the cover of the Equipment
1. If the Equipment is vertically placed, detach the vertical stand according to
Subsection 5.4.4, "Detaching/attaching vertical stand."
2. Remove the two fixing screws in the back of the Equipment.
3. Slide the cover of the Equipment backward.
4. Lift and unmount the cover of the Equipment.
Note: Although the specific model illustrated above is HJ-2030, the work instructions in the figure
commonly apply to HJ-2035, and HJ-2030.
Step 4
Step 3
Step 2

Figure 5-3 Unmounting the Cover of the Equipment

CAUTION
5-10