Table of Contents
Advertisement
5. INSPECTION AND MAINTENANCE
(2) Extracting an extended board
If you happened to bend the blade of slot earthing leaf spring while extracting an
extended board, carefully restore the shape of the blade, paying attention not to
hurt your hand or fingers on the sharp blade of the leaf spring.
Be sure to reattach a stopping panel to an unused slot from which an extended
board is extracted. If the Equipment is used with an exposed unused slot, a
machine failure may result.
Extract an extended board by reversing the order of "(1) Inserting an extended board" in
this subsection.
< NOTE >
When you have difficulty in extracting an extended board with its panel caught by the
blade of the slot earthing leaf spring, do not pull forcibly.
CAUTION
NOTICE
5-18
Advertisement
Table of Contents
