Table 7-3 Log Information Saved By Logsave Command; Table 7-4 Error Message With Logsave Command - Hitachi HF-W2000 35 User Manual

7. MAINTENANCE ACTIONS
FUNCTION
The logsave command without "-e" option saves the log information for preventive
maintenance and analysis of a trouble in a compressed file (logsave.dat). With "-e"
option, the logsave command expands the logsave.dat file. Table 7-3 lists the log
information saved by the logsave command.
Item
Event log file of Windows®
RAS Software log data
Version information of Windows®
Small Memory Dump
System information
Output results of getrasinfo
command
Output results of ipconfig command Network settings
RAID log data
MESSAGE
When execution of the logsave command ends in an error, the error message below is
displayed. When no target directory is found, an error message output by the xcopy
command of Windows® is displayed.
Error message
You do not have the privilege
to run this command. Please
run this command again on
"Administrator: Command
Prompt".

Table 7-3 Log Information Saved by logsave Command

Description
Backup of event log file
RAS Software operation log
Versions of Windows® system files and driver files
Small Memory Dump files under "Minidump" directory
System information such as hardware resources and
software environment
Statuses of the Equipment, e.g., rotation of fans and
temperature inside the cabinet, and/or RAS software
settings
RAID operational log (D Model and B Model only)

Table 7-4 Error Message with logsave Command

Explanation
You do not have the Administrator privilege. Log on to the
local computer as a member of the Administrators group and
then retry the command execution. If User Account Control
(UAC) is enabled, activate the command prompt as
administrator and retry the command execution.
(Windows® 7 only)
7-20