Restrictions - Hitachi HF-W2000 35 User Manual

8. USAGE NOTES

8.2 Restrictions

(1) The Equipment
 When you intend to move the Equipment, first shut down the OS, then
disconnect the power cord plug from the outlet, and wait at least one minute.
Otherwise, failure of hardware such as HDD may result.
 When transporting or carrying the Equipment, repack it using the packing
materials that came with it and are not broken or dented. Transporting or
carrying the Equipment either packed by other packing materials or repacked
by broken or dented packing materials may damage the Equipment.
 By the characteristics of rush current suppression circuit on this Equipment, a
larger rush current than usual may flow when power is supplied before the
power supply unit is naturally cooled after the last power-off. To avoid
possible adverse effects on the connected electronic devices such as
fuse-free breakers and on the service life of this Equipment, wait at least one
minute of the last power-off before you supply power to the Equipment.
 Packing
 After unpacking the Equipment, make sure that you retain all the packing materials
for future transportation and carriage.
 Cable connection
 Insert each connector in the correct orientation and at the correct angle so that it
properly functions. If the connector is inserted incorrectly, the Equipment may not
operate or may malfunction.
 Make sure that the cables are routed neatly around the Equipment so that feet or
hands are not caught. If a power cable is disconnected during operation and the
power is disrupted, important data in the disk may be destroyed.
 Be sure to disconnect the power supplies to the Equipment and the peripherals before
connecting or disconnecting the Equipment and the peripherals. If such connection or
disconnection between the Equipment and the peripherals is made while the power
supplies to the Equipment and the peripherals are connected, a failure may occur.
 Use only the specified cables.
 Do not pull the cables with a strong force. Do not place things on the cables.
NOTICE
8-2