Table of Contents
Advertisement
10. SOFTWARE RAID1
10.3.3 Software RAID1 construction utility
You can use the RAID status display function of the software RAID1 construction utility
"Software RAID1 For Windows(R)" to check the status of the software RAID1.
If the status of the software RAID1 is normal, the following screen will appear.
Show the status
Press Enter:
< NOTE >
In this utility, the HDD mounted in the drive bay 1 of the Equipment is displayed as
"HDD#1" and the HDD mounted in the drive bay 2 as "HDD#2".
(The same notation is used for the rest of this chapter.)
For information about how to check the status of the RAID1 using the software RAID1
construction utility and the explanation of the information displayed on the screen, see
Subsection 10.6.3, "Status display function for RAID1".
Array Status:
HDD#2:
HDD#1:
OPTIMAL
ONLINE
ONLINE
10-6
Advertisement
Table of Contents
