Command Reference; Ecmodeset - Hitachi CE50-10 Instruction Manual

5.18 Command reference
This section describes the commands supported for this unit.
Table 5‒23: List of commands
No. Command name
1

ecmodeset

showecmode
2
3 ecbackup
4 ecrestore
5 ecosupdate
6 rxosenable
rxversion
7
8 disklchk
9 fsconfchk
10 showkxmessage
11 eclogsave
rasledctl
12
13 wdtctl
14 wdtstat
15 force_restart
16 swdt_start
swdt_stop
17
18 swdt_stat
19 usbctl
5.18.1 ecmodeset
<Name>
ecmodeset - Set the next OS startup mode.
<Format>
ecmodeset [-enable | -disable]
<Description>
This command changes the next OS startup mode.
<Options>
• -enable
Sets maintenance mode as the next OS startup mode.
• -disable
Sets normal mode as the next OS startup mode.
<Display examples>
The following is displayed when maintenance mode is set as the next OS startup mode.
Description
Set the next OS startup mode.
Display the OS startup mode.
Back up data.
Restore backup data.
Update the OS in the inactive area.
Change the active OS area.
Display OS version information.
Diagnose the SSD life.
Check mount definitions.
Display extracted KX messages.
Save overall maintenance information.
Control lighting of the RAS indicator AP lamp.
Enable and disable hardware WDT.
Check the monitoring status of hardware WDT.
Forced restart function
Restart the software WDT.
Temporarily stop the software WDT.
Check the monitoring status of software WDT.
Connect or disconnect USB devices.
5. Configuring Software Environment
Reference
5.18.1 ecmodeset
5.18.2 showecmode
5.18.3 ecbackup
5.18.4 ecrestore
5.18.5 ecosupdate
5.18.6 rxosenable
5.18.7 rxversion
5.18.8 disklchk
5.18.9 fsconfchk
5.18.10 showkxmessage
5.18.11 eclogsave
5.18.12 rasledctl
5.18.13 wdtctl
5.18.14 wdtstat
5.18.15 force_restart
5.18.16 swdt_start
5.18.17 swdt_stop
5.18.18 swdt_stat
5.18.19 usbctl
105