How To Print The Factory Mode Settings Menus - Tally Dascom 7010 Series Maintenance Manual

(2) How to print the Factory Mode Settings menus

You can print the current factory mode setting values in the following two ways.
Method 1:
While pressing and holding all keys ([MENU], [FEED], [STOP] and [PAUSE]), turn on the
power.
The current factory mode setting values are printed, and then the printer enters the
Factory mode.
To exit from the Factory mode: Press the [PAUSE] ( ) key.
Method 2
Enter the Factory/Service mode and print the configuration settings.
1) Enter the Factory/Service mode by turning on the power while pressing and holding the
[MENU], [FEED] and [STOP] keys. (Refer to
mentioned earlier.)
2) Press the [MENU] ( ) or [FEED] ( ) key until "Test Mode" main menu appears.
3) Press the [STOP] ( ) key to enter the Test Mode.
4) Press the [MENU] ( ) or [FEED] ( ) key until "Print Pattern" submenu appears.
5) Press the [STOP] ( ) key to enter the Print Pattern submenu.
6) Press the [MENU] ( ) or [FEED] ( ) key and select "Current Config".
7) Press the [STOP] ( ) key to print the configuration settings.
The current factory mode setting values are printed.
To exit from menu mode:
Press the [PAUSE] ( ) key until the printer exits from the "Test Mode" main menu.
"(1) How to enter Factory/Service
2-43
2-3. Operation Panel
Mode"