Hex Dump Mode - Tally Dascom 7010 Series Maintenance Manual

(2) Hex dump mode

You can print the data in the receive buffer in the hexadecimal form.
For label:
1. While pressing and holding the [STOP] key, turn on the power.
2. Wait until the POWER LED turns on and the LCD indicates "Hex Dump Mode" "Label
Media", and then release the [STOP] key.
The printer enters hex dump mode and, when print data is sent to the printer, hex dump
printing starts.
To exit from hex dump mode: Turn off the power.
For continuous media:
1. While pressing and holding the [STOP] key, turn on the power.
2. Wait until the POWER LED turns on and the LCD changes from "Hex Dump Mode" "Label
Media" to "Cont. Media", and then release the [STOP] key.
The printer enters hex dump mode and, when print data is sent to the printer, hex dump
printing starts.
To exit from hex dump mode: Turn off the power.
DUMP LIST
02 40 30 31 30 30 0D 02 60 30 30 32 30 0D 02 4C .M0100..c0020..L
44 31 31 0D 31 30 30 30 30 30 30 30 30 30 31 30
30 30 31 30 31 32 33 34 35 36 37 38 39 3A 3B 3C 0010123456789:;<
[Dump list example]
2-39
D11.100000000010
2-3. Operation Panel