Factory/Service Mode; How To Enter Factory/Service Mode - Tally Dascom 7010 Series Maintenance Manual

2-3-4. Factory/Service mode

Factory mode and Service mode are available for maintenance work,
Factory mode:
You can change the factory-set items such as logical shift of the sensor or head.
Service mode:
You can perform checks such as head check and service counter value that shows the media
length printed.
In this section, the followings are explained.
•

How to enter Factory/Service Mode

• How to print the Factory Mode Settings menus
• How to change the settings in Factory mode
• How to operate service menu in Service mode
(1) How to enter Factory/Service Mode
To enter Factory/Service mode, perform the following operation.
• While pressing and holding the [MENU], [FEED] and [STOP] keys, turn on the printer.
Then, the following is displayed on the LCD.
Main Menu
Factory Setup
Exit Enter
Key function in Factory/Service mode:
[FEED] ( )
[MENU] ( )
[PAUSE] ( )
[STOP] ( )
Returns to previous item, or the value is incremented/changed.
Goes to the next item, or the value is decremented/changed.
Resets the printer, or exits from the current menu.
Acts as the Enter key.
2-41
2-3. Operation Panel