C.1 Starting Linux Tpu Updater - Klein 5000 V2 Series Operation And Maintenance Manual

APPENDIX C: C
The TPU is configured at the factory. However, should changes be required,
configuring and updating the TPU can be performed using Linux Updater. This
program is automatically installed when installing SonarPro and can be used to
perform the following tasks:
• Query or change the IP address of the TPU.
• Edit the startup file of the TPU.
• Download and install software updates to the TPU.

C.1 Starting Linux TPU Updater

Linux TPU Updater is started by double-clicking the Linux TPU Updater
icon
open as shown Figure C-1.
ONFIGURING AND
TPU
THE
on the Windows desktop. The Klein Linux TPU Updater dialog box will
Figure C-1:
The Klein Linux TPU Updater Dialog Box
C-1
U
PDATING