Appendix B: Configuring And Updating The Tpu/Sp-Iii Tpu; B.1 Starting Linux Tpu/Sp-Iii Tpu Updater; Figure B-1: The Klein Linux Tpu Updater Dialog Box - Klein 4000 Series Operation And Maintenance Manual

APPENDIX B: C
The TPU/SP-III TPU is configured at the factory. However, should changes be
required, configuring and updating the TPU/SP-III TPU can be performed using
Linux Updater. This program is automatically installed when installing SonarPro
and can be used to perform the following tasks:
• Query or change the IP address of the TPU/SP-III TPU.
• Edit the startup file of the TPU/SP-III TPU.
• Download and install software updates to the TPU/SP-III TPU.

B.1 Starting Linux TPU/SP-III TPU Updater

Linux TPU/SP-III TPU Updater is started by double-clicking the Linux TPU
Updater icon
box will open as shown Figure B-1.
ONFIGURING AND
TPU/SP-III TPU
THE
on the Windows desktop. The Klein Linux TPU Updater dialog
The Klein Linux TPU Updater Dialog Box
Figure B-1:
B-1
U
PDATING