Changing The Oil And Oil Filter - Manitowoc Grove GMK 4100L-1 Maintenance Manual

7.3.8
Oil, spare parts,
tools
Prerequisites
Changing
O
Maintenance manual
GMK 4100L-1

Changing the oil and oil filter

Engine oil Designation
in litres (gal) to DIN 51502
34 (9.0) HD - CD
Designation
Oil filter with cover gasket
Original oil drain plug
– Receptacle, approx. 40 ltr (11 gal);
– Torque wrench for a torque of 55 Nm (40.5 lbf ft).
•
Find out the prescribed oil specification and about the need to shorten
the maintenance interval under special operating conditions;
à
Engine manufacturer's documentation .
•
Find out about the safety instructions and the sequence of steps to change
the oil and the oil filter;
– The truck crane must be level.
– The engine must be switched off and secured against unauthorised use;
à
p. 2 - 3.
Risk of environmental damage due to leaking consumables.
Always let consumables drain into suitable receptacles. Wipe up any
consumables that escape.
Store/dispose of consumables and any soaked equipment properly.
Ask about the applicable regulations.
Specification
classification
MIL-L 2104 C
DB 228.5
à
p. 2 - 4.
à
Engine manufacturer's documentation .
3 302 364 en
Maintenance work on the carrier
GROVE part no.
SAE 5 W-30
03329588
Quantity GROVE part no.
1 04163013
1 04161529
7.3 Engine
Y 2
s
7 - 25