Changing The Oil And Oil Filter - Manitowoc Grove GMK 5250L Maintenance Manual

Maintenance work on the carrier
7.3 Engine
7.3.9
Oil, spare parts,
tools
Prerequisites
Changing
O
O
7 - 24

Changing the oil and oil filter

Engine oil in Designation to
litres (gal) DIN 51502
39 (10.3) HD - CD
Designation
Oil filter
Cover gasket
Gasket for oil drain plug
– Receptacle, approx. 40 l (11 gal);
– Torque wrench for torque of 55 Nm (40.5 lbf ft).
– Connecting piece and hose (tool box);
•
Find out the prescribed oil specification and about the necessity of short-
ening the maintenance interval under special operating conditions;
à
Engine manufacturer's documentation .
•
Find out about the safety instructions and the sequence of steps to change
the oil and the oil filter;
– The truck crane must be level.
– The engine must be switched off and secured against unauthorised use;
à
p. 2 - 3.
Risk of environmental damage due to leaking consumables.
Always let consumables drain into suitable receptacles. Wipe up any con-
sumables that have leaked.
Store/dispose of consumables and any soaked equipment properly.
Ask about the applicable regulations.
If a valve is already mounted on the oil pan:
Risk of environmental damage due to leaking consumables.
If a valve is mounted on the oil pan, use the delivered connecting piece with
hose and a receptacle with adequate capacity to drain the oil.
Specification
Classification
MIL-L 2104 C
DB 228.5
à
p. 2 - 4.
à
Engine manufacturer's documentation .
3 302 744 en
GROVE part no.
SAE 5 W-30
03329588
Quantity GROVE part no.
1 04161614
1 03328606
1 04161531
à
p. 7 - 112.
Maintenance manual
Y 2
GMK5250L