Topping Up The Oil - Manitowoc Grove GMK 4100L-1 Maintenance Manual

7.3.2
Oil
Prerequisites

Topping up the oil

S
G
Maintenance manual
GMK 4100L-1
Topping up the oil
Data on the prescribed oil specification;
documentation .
Engine oil Designation
in litres (gal) to DIN 51502
34 (9.0) HD - CD
– The truck crane must be level.
– The engine must be switched off and secured against unauthorised use;
à
p. 2 - 3.
Risk of damage to the engine if the oil level is too high.
Do not overfill with oil; the oil level must not be higher than the max. mark
(arrow marking). Drain off oil if necessary;
documentation .
Risk of burns when the engine is hot.
During operation, the engine and add-on parts reach temperatures up to
400 °C (750 °F). Wear appropriate protective gloves and be careful not to
touch hot parts.
à
Specification
classification
MIL-L 2104 C
DB 228.5
•
Add oil through the filler neck (2) up to the
max. mark.
•
Close the filler neck with the cap.
•
Put the dipstick (1) into the dipstick tube
after checking the oil level.
3 302 364 en
Maintenance work on the carrier
Engine manufacturer's
GROVE part no.
SAE 5 W-30
03329588
à
Engine manufacturer's
7.3 Engine
7 - 15