Maintenance Work On The Carrier; General Instructions; Covers - Manitowoc Grove GMK 4100L-1 Maintenance Manual

7
7.1
7.1.1
Maintenance manual
GMK 4100L-1

Maintenance work on the carrier

General instructions

Covers

Various types of work (e.g. oil change) require that covers be removed.
The truck crane GMK 4100L-1 is fitted as
standard with an AdBlue system for exhaust gas
emission control. In this case an AdBlue tank (1)
fitted to the truck crane;
An engine that can be operated at the
respective place of use without an AdBlue
system is available, but only as special
equipment. In that case there is no AdBlue
tank (1) fitted to the truck crane. The relevant
maintenance work does not arise;
system with exhaust emission control , p. 7 - 33.
Before maintenance work
•
Remove the covers (1)
•
Remove the covers (2) only if you are
performing general work on the engine and
you need improved access to the engine.
After maintenance work
•
Fasten the covers (1) and (2) with the
catches.
3 302 364 en
Maintenance work on the carrier
7.1 General instructions
à
p. 7 - 33.
à
Exhaust
7 - 1