Cleaning Selector Shaft; Removing And Installing Hydraulic Control Unit; Removing And Installing Input Shaft - Audi A8 2003 Workshop Manual

Audi A8 2003 ➤
multitronic 01J, front-wheel drive - Edition 11.2007
1.3

Cleaning selector shaft

• Automatic gearbox control unit -J217- is removed
The description can be found under ⇒ Servicing multitronic 01J
and 0AN; Rep. Gr. 38
1.4 Removing and installing hydraulic con‐
trol unit
– Remove end cover ⇒ page 90
– Remove hydraulic control unit ⇒ Servicing multitronic 01J and
0AN; Rep. Gr. 38 .
1.5

Removing and installing input shaft

– Remove gearbox:
♦ ⇒ "5.1 Removing gearbox - vehicles with 3.0 ltr. MPI engine",
page 36
♦ ⇒ "5.3 Removing gearbox - vehicles with 3.2 ltr. FSI engine
and 2.8 ltr. FSI engine", page 49
Remove input shaft ⇒ Servicing multitronic 01J and 0AN; Rep.
Gr. 38 .
96
Rep. Gr.38 - Gears, control
.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.