Audi A8 2003 ➤
Brake system - Edition 03.2013
8
Brake servo/ brake master cylinder -
exploded view
Note
Use only new brake fluid. Observe information on brake fluid res‐
ervoir!
1 - Torx bolt -T45-
❑ Tightening torque: 23
Nm
2 - Self-locking hexagon nut
❑ Tightening torque: 49
Nm
3 - Tandem brake master cyl‐
inder
❑ Cannot be repaired. If
faulty, renew complete.
❑ Removing and installing
⇒ page 114
4 - Sealing plug
❑ Moisten with brake fluid
and press into brake flu‐
id reservoir
5 - Filler cap
6 - Brake fluid reservoir
7 - Vacuum hose
❑ Insert into brake servo
unit
8 - Sealing plug
❑ Connection for vacuum
hose
9 - Tandem brake servo
❑ Adjusting ball head
⇒ page 113
❑ On petrol engines the
vacuum required is tak‐
en from the intake mani‐
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
112
Rep. gr.47 - Brakes - hydraulics