Dlp-G11 Open The Fmec Cover - Cisco ONS 15454 Hardware Installation Manual

Installing the ONS 15454 M12 (ANSI and ETSI) Shelf
Procedure
Step 1
Complete the
Step 2 Complete the
Step 3
Continue with the
Stop. You have completed this procedure.

DLP-G11 Open the FMEC Cover

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Procedure
Step 1 Unscrew the screws on the FMEC cover.
DLP-G11 Open the FMEC Cover , on page
DLP-G12 Remove the FMEC Cover , on page
NTP-G6 Install the MIC-A/P and MIC-T/C/P FMECs (ETSI Only), on page
This task opens the FMEC cover. The FMEC cover must be opened to install the
MIC-A/P and the MIC-C/T/P.
Medium slot-head screwdriver
DLP-G9 Open the Front Cabinet Compartment (Door) , on page 57
Required
Onsite
None
DLP-G11 Open the FMEC Cover
61.
62.
Cisco ONS 15454 Hardware Installation Guide
66.
61