Dlp-G10 Remove The Front Door - Cisco ONS 15454 Hardware Installation Manual

DLP-G10 Remove the Front Door

Procedure
Step 1
Open the front door lock.
The ONS 15454 shelf comes with a pinned hex key for locking and unlocking the front door. Turn the key
counterclockwise to unlock the door and clockwise to lock it. The following figure illustrates the front door
of the ANSI shelf.
Figure 33: Cisco ONS 15454 ANSI Front Door
Step 2 Press the door button to release the latch. A button on the right side of the shelf releases the door.
Step 3
Swing the door open.
Step 4 Return to your originating procedure (NTP).
DLP-G10 Remove the Front Door
Purpose
Tools/Equipment
Prerequisite Procedures
Cisco ONS 15454 Hardware Installation Guide
58
This task removes the front cabinet compartment door.
Open-end wrench
DLP-G9 Open the Front Cabinet Compartment (Door) , on page 57
Installing the ONS 15454 M12 (ANSI and ETSI) Shelf