Cisco ONS 15454 Hardware Installation Manual page 354

NTP-G258 Install the Standard Door of the ONS 15454 M6 Shelf
Figure 220: Installing the Standard Door
Step 2 Align the standard door hinges with the chassis hinges.
Step 3
Release the hinge pins.
Step 4 Pull the retention feature from the door (see
Step 5
Loosen the screws and place the mechanical stop on the retention feature. (See Diagram 1 of
Mounting the Mechanical Stop, on page
Step 6 Place the retention feature on the pin present on the chassis. (See Diagram 2 of
Mechanical Stop, on page
Step 7 Raise the door to slide the pin. (See Diagram 3 of
Step 8
Slide the mechanical stop to lock the door position and tighten the screws. (See Diagram 4 of
Mounting the Mechanical Stop, on page
Note
Cisco ONS 15454 Hardware Installation Guide
324
325.)
Reinstall the door after installing all the other modules.
Figure 221: Mounting the Mechanical Stop, on page
325.)
Figure 221: Mounting the Mechanical Stop, on page
325.)
Installing the ONS 15454 M6 Shelf
325).
Figure 221:
Figure 221: Mounting the
325.)
Figure 221: