Cisco ONS 15454 Hardware Installation Manual page 278

Hide thumbs Also See for ONS 15454:

Table of Contents

DLP-G597 Connect Office Power (DC) to the ONS 15454 M2 Shelf (ANSI Only)

Figure 164: Connecting Office Power—DC Power Module (ANSI Only)

Tighten the screws to a torque value of 7 in-lb (0.79 N-m) to lock the lugs.

Tighten the screws to a torque value of 4 in-lb (0.45 N-m) of the terminal block protective cover on the DC

power module (see the following figure).

Figure 165: Connecting Office Power—DC Power Modules (ANSI Only)

Cisco ONS 15454 Hardware Installation Guide

There are two DC power terminals—A and B. Each power terminal is connected with two

cables—one for RET and the other for -48V.

Use only pressure terminal connectors, such as ring and fork types, when terminating the battery,

battery return, and frame ground conductors.

Installing the ONS 15454 M2 Shelf