Installing the ONS 15454 M12 (ANSI and ETSI) Shelf
Fiber Management Using the Optional ANSI Tie-Down Bar
Figure 99: Fiber-Storage Tray
Fiber Management Using the Optional ANSI Tie-Down Bar
You can install a 5-inch (127-mm) tie-down bar on the rear of the ANSI chassis. You can use tie-wraps or
other site-specific material to bundle the cabling and attach it to the bar so that you can more easily route the
cable away from the rack.
The following figure shows the tie-down bar, the ONS 15454 ANSI, and the rack.
Figure 100: Tie-Down Bar on the Cisco ONS 15454 ANSI Shelf
Cisco ONS 15454 Hardware Installation Guide
175