Installing the ONS 15454 M12 (ANSI and ETSI) Shelf
Figure 78: Four-Degree Patch-Panel Tray
The following figure shows an eight-degree patch-panel tray.
Figure 79: Eight-Degree Patch-Panel Tray
Install PP-Mesh
The PP-Mesh is an ONS 15454 unit that can be installed either above or below the DWDM generating
equipment according to the local site practice.
The PP-Mesh is a 2 rack unit (RU) high. Each package includes one set of the following brackets:
• 19-inch (482.6-mm) or 23-inch (584.2-mm) reversible (two-way) mounting brackets that can be rotated
• ETSI brackets that are used for ETSI standard racks.
to fit either rack size. These reversible brackets are used for EIA and IEC standard racks.
Cisco ONS 15454 Hardware Installation Guide
Install PP-Mesh
163