Cisco ONS 15454 Hardware Installation Manual page 5

NTP-G5 Remove the Backplane Covers (ANSI Only)
DLP-G13 Remove the Lower Backplane Cover
DLP-G14 Remove the Backplane Sheet Metal Cover
ONS 15454 ETSI Front Mount Electrical Connection
NTP-G6 Install the MIC-A/P and MIC-T/C/P FMECs (ETSI Only)
Power and Ground Description
NTP-G7 Install the Power and Ground
DLP-G17 Connect Office Power to the ONS 15454 ETSI
DLP-G18 Connect Office Power to the ONS 15454 ANSI
DLP-G19 Turn On and Verify Office Power
Shelf Voltage and Temperature
NTP-G230 View Shelf Voltage and Temperature
Fan-Tray Assembly
76
Fan-tray Units for ONS 15454 Cards
Fan Speed
81
Fan Failure
81
Air Filter
82
NTP-G8 Install the Fan-Tray Assembly
ONS 15454 ANSI Alarm Expansion Panel
NTP-G9 Install the Alarm Expansion Panel (ANSI Only)
ONS 15454 ANSI Alarm, Timing, LAN, and Craft Pin Connections
Alarm Contact Connections
Timing Connections
98
LAN Connections
98
TL1 Craft Interface Installation
NTP-G10 Attach Wires to Alarm, Timing, LAN, and Craft Pin Connections
DLP-G20 Install Alarm Wires on the MIC-A/P (ETSI Only)
DLP-G21 Install Timing Wires on the MIC-C/T/P (ETSI Only)
DLP-G22 Install LAN Wires on the MIC-C/T/P (ETSI Only)
DLP-G23 Install Alarm Wires on the Backplane (ANSI Only)
DLP-G24 Install Timing Wires on the Backplane (ANSI Only)
DLP-G25 Install LAN Wires on the Backplane (ANSI Only)
DLP-G26 Install the TL1 Craft Interface Wires (ANSI Only)
NTP-G11 Install an External Wire-Wrap Panel on the AEP (ANSI Only)
63
64
65
65
67
68
74
75
76
78
82
85
91
97
99
Cisco ONS 15454 Hardware Installation Guide
Contents
66
70
71
94
100
101
104
105
106
109
110
111
112
v