Download Print this page

Advertisement

Quick Reference
Cisco ONS 15454 SONET and SDH TL1 Command Quick
Reference Guide, Release 4.7
This guide lists TL1 commands and autonomous messages by category. It includes basic
descriptions and input and output formats supported by Cisco ONS 15454 and
Cisco ONS 15454 SDH, Release 4.7.
TL1 commands conform to the following syntax:
a:b:c:d:e: ...z;
where:
"a" is the Command Code
"b" is the Target Identifier (TID)
"c" is the Access Identifier (AID) or the User Identifier (UID)
"d" is the Correlation Tag (CTAG)
"e: ...z;" are other positions required for various commands
The TID, AID, and CTAG parameters route and control the TL1 command.
The remaining parameters provide additional information required to complete
the action requested by the command.

Advertisement

   Summary of Contents for Cisco ONS 15454 SONET

  • Page 1

    Reference Guide, Release 4.7 This guide lists TL1 commands and autonomous messages by category. It includes basic descriptions and input and output formats supported by Cisco ONS 15454 and Cisco ONS 15454 SDH, Release 4.7. TL1 commands conform to the following syntax: a:b:c:d:e: ...z;...

  • Page 2

    DWDM Table 1 DWDM COPY-RFILE:[<TID>]:[<SRC>]:<CTAG>::TYPE=<XFERTYPE>,[SRC=<SRC1>,] [DEST=<DEST>,][OVWRT=<OVWRT>,][FTTD=<FTTD>]; Downloads a new software package or file from the location specified by the FTP URL. DLT-EQPT:[<TID>]:<AID>:<CTAG>[:::]; Deletes a card from the Network Element (NE). DLT-LNK-<MOD2O>:[<TID>]:<FROM>,<TO>:<CTAG>; Deletes an optical link between two optical connection points. DLT-OSC:[<TID>]:<AID>:<CTAG>;...

  • Page 3

    Table 1 DWDM (continued) ED-GIGE:[<TID>]:<AID>:<CTAG>:::[ENCAP=<ENCAP>,][CMDMDE=<CMDMDE>[:] [<PST>[<,<SST>]]; Edits the Gigabit Ethernet-specific parameters for the port. ED-LNK-<MOD2O>:[<TID>]:<FROM>,<TO>:<CTAG>::::<PST>,[<SST>]; Edits an optical link. ED-<MOD2DWDMPAYLOAD>:[<TID>]:<AID>:<CTAG>:::[NAME=<NAME>,] [CMDMDE=<CMDMDE>]:<PST>,[<SST>]; Edits the operating parameters for a DWDM facility. ED-OCH:[<TID>]:<AID>:<CTAG>:::[NAME=<PORTNAME>,][SFBER=<SFBER>,] [SDBER=<SDBER>,][ALSMODE=<ALSMODE>,][ALSRCINT=<ALSRCINT>,] [ALSRCPW=<ALSRCPW>,][COMM=<COMM>,][GCCRATE=<GCCRATE>,] [OSDBER=<OSDBER>,][DWRAP=<DWRAP>,][FEC=<FEC>,] [PAYLOAD-MAP=<PAYLOADMAP>,][RLASER=<RLASER>,][SOAK=<SOAK>]:[<PST>], [<SST>]; Edits the operating parameters of an Optical Channel (OCH) facility. ED-<OCN_TYPE>:[<TID>]:<AID>:<CTAG>:::[NAME=<PORTNAME>,][DCC=<DCC>,] [GCC=<GCC>,][AREA=<AREA>,][SYNCMSG=<SYNCMSG>,][SENDDUS=<SENDDUS>,] [PJMON=<PJMON>,][SFBER=<SFBER>,][SDBER=<SDBER>,][MODE=<MODE>,]...

  • Page 4

    Table 1 DWDM (continued) ED-TRC-OCH:[<TID>]:<SRC>:<CTAG>:::[EXPTRC=<EXPTRC>,][TRC=<TRC>,] [TRCMODE=<TRCMODE>,][TRCLEVEL=<TRCLEVEL>,][TRCFORMAT=<TRCFORMAT>][:]; Edits trace-related optical channel facilities. ED-WDMANS:[<TID>]:<AID>:<CTAG>:::[POWERIN=<POWERIN>,] [POWEROUT=<POWEROUT>,][POWEREXP=<POWEREXP>,][NTWTYPE=<RINGTYPE>,][:]; Edits the optical node setup application attributes. ED-WLEN:[<TID>]:<AID>:<CTAG>:::[SIZE=<SIZE>]:[<PST>],[<SST>]; Edits wavelength (WLEN) provisioning. ENT-EQPT:[<TID>]:<AID>:<CTAG>::[<EQPTTYPE>]:[PEERID=<PEERID>,] [REGENNAME=<REGENNAME>,][PWL=<PWL>,][CARDMODE=<CARD_MODE>]; Creates the card type and attributes for a given equipment slot in the NE. It also automatically enters all facilities supported by the card, assigning default values to all port and path attributes.

  • Page 5

    Table 1 DWDM (continued) OPR-SLV-WDMANS:[<TID>]:<AID>:<CTAG>[::::]; Invokes the calculation of the expected span loss verification. OPR-WDMANS:[<TID>]::<CTAG>; Operates the Automatic Optical Node Setup (AONS) application inside the NE to force a recompute of the value to be assigned to all variable optical attenuators (VOAs) representing the Optical Path inside the node.

  • Page 6

    Table 1 DWDM (continued) RTRV-ALM-<MOD2ALM>:[<TID>]:<AID>:<CTAG>::[<NTFCNCDE>],[<CONDTYPE>], [<SRVEFF>][,,,];: Instructs the NE to retrieve and send the current status of an alarm condition. Output format: SID DATE TIME M CTAG COMPLD “<AID>,[<AIDTYPE>]:<NTFCNCDE>,<CONDTYPE>,<SRVEFF>,[<OCRDAT>],[<OCRTM>],, :[<DESC>]” RTRV-ALMTH-<MOD2>:[<TID>]:<AID>:<CTAG>::<ALMTHR>[,,::]; Retrieves the alarm threshold values. Output format: SID DATE TIME M CTAG COMPLD “<AID>,<MOD>:<CONDTYPE>,,,<THLEVEL>”...

  • Page 7

    Table 1 DWDM (continued) RTRV-COND-ALL:[<TID>]::<CTAG>::[<TYPEREQ>][,,,]; Retrieves the current standing condition for all entities. Output format: SID DATE TIME M CTAG COMPLD “<AID>,[<AIDTYPE>]:[<NTFCNCDE>],<TYPEREP>,[<SRVEFF>],[<OCRDAT>], [<OCRTM>],,,[<DESC>]” RTRV-COND-EQPT:[<TID>]:<AID>:<CTAG>::[<TYPEREQ>][,,,]; Retrieves the equipment conditions. Output format: SID DATE TIME M CTAG COMPLD “<AID>,[<AIDTYPE>]:[<NTFCNCDE>],<TYPEREP>,[<SRVEFF>],[<OCRDAT>], [<OCRTM>],,,[<DESC>]” RTRV-COND-<MOD2ALM>:[<TID>]:<AID>:<CTAG>::[<TYPEREQ>][,,,]; Retrieves the current standing condition or/and state associated with an entity. Output format: SID DATE TIME M CTAG COMPLD...

  • Page 8

    Table 1 DWDM (continued) RTRV-EQPT:[<TID>]:<AID>:<CTAG>; Retrieves card level attributes. Output format: SID DATE TIME M CTAG COMPLD “<AID>:<EQPTTYPE>,<EQUIP>,[<ROLE>],[<STATUS>]:[PROTID=<PROTID>,] [PRTYPE=<PRTYPE>,][RVRTV=<RVRTV>,][RVTM=<RVTM>,] [CARDNAME=<CARDNAME>,][PEERID=<PEERID>,][REGENNAME=<REGENNAME>,] [PWL=<PWL>,][CARDMODE=<CARD_MODE>:]<PST>],[<SST>]” RTRV-FAC:[<TID>]:<SRC>:<CTAG>[::::]; Retrieves facility data (port data). Output format: SID DATE TIME M CTAG COMPLD "<SRC>::PAYLOAD=<PAYLOAD>:<PST_PSTQ>,[<SSTQ>]" RTRV-FFP-OCH:[<TID>]:<AID>:<CTAG>[::::]; Retrieves the protection group information for the TXPP_MR_2.5G trunk port. Output format: SID DATE TIME M CTAG COMPLD...

  • Page 9

    Table 1 DWDM (continued) RTRV-INV:[<TID>]:<AID>:<CTAG>[::::]; Queries the NE and returns a listing of the equipment inventory. For each unit in the system, it identifies the unit’s firmware numbers and the unit’s Common Language Equipment Identification (CLEI) code. Output format: SID DATE TIME M CTAG COMPLD “<AID>,<AIDTYPE>::[PN=<PN>],[HWREV=<HWREV>],[FWREV<FWREV>], [SN=<SN>],[CLEI=<CLEI>],[TWL1=<TWL1>],[TWL2=<TWL2>],[TWL3=<TWL3>],...

  • Page 10

    Table 1 DWDM (continued) RTRV-NE-APC:[<TID>]::<CTAG>; Retrieves the APC application ports that are involved in node setup regulation. Output format: SID DATE TIME M CTAG COMPLD “<AID>,<AIDTYPE>::[MODIFDAT=<MODIFDAT>,][MODIFTM=<MODIFTM>,] [CHECKDAT=<CHECKDAT>,][CHECKTM=<CHECKTM>, [:]” RTRV-NE-WDMANS:[<TID>]:[<AID>]:<CTAG>[::::]; Retrieves the optical node setup application ports involved in node setup regulation. Output format: SID DATE TIME M CTAG COMPLD...

  • Page 11

    Table 1 DWDM (continued) RTRV-<OCN_TYPE>:[<TID>]:<AID>:<CTAG>[:::::] Retrieves the attributes (service parameters) and state of an OC-N facility. Output format: SID DATE TIME M CTAG COMPLD “<AID>:,,[<ROLE>],[<STATUS>]:[NAME=<PORTNAME>,][DCC=<DCC>,] [GCC=<GCC>,][NAME=<NAME>,][CMDMDE=<CMDMDE>,][EXPTRC=<EXPTRC>,] [INCTRC=<INCTRC>,][TRC=<TRC>,][TRCMODE=<TRCMODE>,] [TRCFORMAT=<TRCFORMAT>,][AREA=<AREA>,][TMGREF=<TMGREF>,] [SYNCMSG=<SYNCMSG>,][SENDDUS=<SENDDUS>,][PJMON=<PJMON>,] [SFBER=<SFBER>,][SDBER=<SDBER>,][MODE=<MODE>,][WVLEN=<WVLEN>,] [RINGID=<RINGID>,] [BLSRTYPE=<BLSRTYPE>,][MUX=<MUX>,] [UNIC=<UNIC>,][CCID=<CCID>,][NBRIX=<NBRIX>,][SOAK=<SOAK>,] [SOAKLEFT=<SOAKLEFT>,][SSMRCV=<SSMRCV>,][OSPF=<OSPF>,] [LDCC=<LDCC>,][LBCK=<LBCL>,][OPT=<OPT>,][OPR=<OPR>:]<PST>,[<SST>]” RTRV-OMS:[<TID>]:<AID>:<CTAG>; Retrieves the attributes (service parameters) and state of an OMS facility. Output format: SID DATE TIME M CTAG COMPLD...

  • Page 12

    Table 1 DWDM (continued) RTRV-OSC:[<TID>]:<AID>:<CTAG>; Retrieves the OSC information of the NE. Output format: SID DATE TIME M CTAG COMPLD “<AID>::[RINGID=<RINGID>,][NODEID=<NODEID>,][EAST=<EAST>,][WEST=<WEST>]” RTRV-OTS:[<TID>]:<AID>:<CTAG>[::::]; Retrieves the attributes (service parameters) and state of an OTS facility. Output format: SID DATE TIME M CTAG COMPLD “<AID>:RDIRN=<RDIRN>,OPTYPE=<OPTICALPORTTYPE>,[OPWR=<POWER>,] [ILOSS=<ILOSS>,][VOAMODE=<VOAMODE>,][VOAATTN=<VOAATTN>,] [VOAPWR=<VOAPWR>,][VOAREFATTN=<VOAREFATTN>,]...

  • Page 13

    Table 1 DWDM (continued) RTRV-PMSCHED-<MOD2>:[<TID>]:<AID>:<CTAG>; Retrieves the performance monitoring (PM) reporting schedule that was set for the NE by the SCHED-PMREPT-OTS command. Output format: SID DATE TIME M CTAG COMPLD “<AID>,[<AIDTYPE>]:<REPTINVL>,<REPTDAT>,<REPTTM>,[<NUMINVL>],, [<MONLEV>],<LOCN>,,[<TMPER>],[<TMOFST>],[<INHMODE>]” RTRV-PROTNSW-OCH:[<TID>]:<AID>:<CTAG>; Retrieves the protection switch status of a TXPP_MR_2.5G card. Output format: SID DATE TIME M CTAG COMPLD...

  • Page 14

    Table 1 DWDM (continued) RTRV-TRC-OCH:[<TID>]:<SRC>:<CTAG>::[<MSGTYPE>],[<TRCLEVEL>][::]; Retrieves the sent trace string, expected trace string, received trace string, trace mode, and trace level for the SONET J0 Section Trail Trace Identifier (TTI) Path and Section monitoring levels of the DWDM facility. Output format: SID DATE TIME M CTAG COMPLD “<CHANNEL>,<MOD>::[TRCLEVEL=<TRCLEVEL>,][EXPTRC=<EXPTRC>,][TRC=<TRC>,]...

  • Page 16

    Vietnam • Zimbabwe CCVP, the Cisco logo, and Welcome to the Human Network are trademarks of Cisco Systems, Inc.; Changing the Way We Work, Live, Play, and Learn is a service mark of Cisco Systems, Inc.; and Access Registrar, Aironet, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, CCSP, Cisco, the Cisco Certified Internetwork Expet logo, Cisco IOS,...

This manual also for:

Ons 15454 sdh

Comments to this Manuals

Symbols: 0
Latest comments: