Dlp-G679 Mount The Ons 15454 Shelf In A Rack (Two People) - Cisco ONS 15454 Hardware Installation Manual

Installing the ONS 15454 M12 (ANSI and ETSI) Shelf
Figure 14: Mounting an ONS 15454 ETSI in a Rack
Step 3 Using the hex tool that shipped with the assembly, install the two temporary set screws into the holes that will
not be used to mount the shelf. Let the set screws protrude sufficiently to hold the mounting brackets.
Step 4 Lift the shelf to the desired position in the rack and set it on the screws.
Step 5
Align the screw holes on the mounting brackets with the mounting holes in the rack.
Step 6 Using the Phillips Dynamometric screwdriver, install one mounting screw in each side of the assembly.
When the shelf is secured to the rack, install the remaining mounting screws.
Step 7 When the shelf is secured to the rack, install the remaining mounting screws.
Note
Step 8
Using the hex tool, remove the temporary set screws.
Step 9 Return to your originating procedure (NTP).

DLP-G679 Mount the ONS 15454 Shelf in a Rack (Two People)

Purpose
Use at least one set of the horizontal screw slots on the shelf to prevent slippage.
This task allows two people to mount the shelf in a rack.
DLP-G679 Mount the ONS 15454 Shelf in a Rack (Two People)
Cisco ONS 15454 Hardware Installation Guide
37