Typical Dwdm Rack Layouts - Cisco ONS 15454 Hardware Installation Manual

Typical DWDM Rack Layouts

The following figure shows rear cover installation.
Figure 61: Installing the Rear Cover
Step 6 Continue with the
Stop. You have completed this procedure.
Typical DWDM Rack Layouts
Typical dense wavelength division multiplexing (DWDM) applications might include:
• 3 ONS 15454 shelves
• 1 Dispersion Compensating Unit (DCU)
• 7 patch panels (or fiber-storage trays), in either 1rack unit (RU) or 2 RU sizes
Or, alternatively:
• 3 ONS 15454 shelves
• 2 DCUs
• 6 standard patch-panel trays (or fiber-storage trays), or 3 deep patch-panel trays, in either 1 RU or 2 RU
Cisco ONS 15454 Hardware Installation Guide
120
NTP-G14 Install DWDM Equipment, on page
• 1RU: Fiber-storage tray and 64-channel patch panel
• 2 RU: Y-cable patch panel, 64-channel patch panel, 80-channel patch panel, and mesh patch panel
(4 or 8 degree)
sizes
• 1RU: Fiber-storage tray and 64-channel patch panel
Installing the ONS 15454 M12 (ANSI and ETSI) Shelf
123.