Cisco ONS 15454 Hardware Installation Manual page 334

DLP-G562 Mounting the Brackets on the ONS 15454 M6 Shelf for ETSI Rack Configuration
Figure 204: Mounting the Brackets with Air Deflectors (Front-to-Back) on the ONS 15454 M6 Shelf for ANSI Rack Configuration
Step 13
Return to your originating procedure (NTP).
DLP-G562 Mounting the Brackets on the ONS 15454 M6 Shelf for ETSI Rack
Configuration
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Cisco ONS 15454 Hardware Installation Guide
304
This task installs the mounting brackets on the ONS 15454 M6 shelf for ETSI
rack configuration.
Note In an ETSI rack, the mounting brackets are installed only in the front
position.
• #2 Phillips Dynamometric screwdriver
• Medium slot-head screwdriver
• Small slot-head screwdriver
NTP-G305 Unpack and Inspect the ONS 15454, ONS 15454 M2, and ONS 15454
M6 Shelves, on page 20
As needed
Onsite
None
Installing the ONS 15454 M6 Shelf