Dlp-G595 Remove The Standard Door Of The Ons 15454 M2 Shelf - Cisco ONS 15454 Hardware Installation Manual

DLP-G595 Remove the Standard Door of the ONS 15454 M2 Shelf

Step 3
Swing the door open.
Figure 140: Cisco ONS 15454 M2 Standard Door—Opened
Step 4 Return to your originating procedure (NTP).
DLP-G595 Remove the Standard Door of the ONS 15454 M2 Shelf
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Procedure
Step 1
Unscrew the nut holding the ground cable to the shelf. Remove the nut.
Step 2 Remove the ground cable from the shelf as shown in the following figure
Cisco ONS 15454 Hardware Installation Guide
220
This task removes the standard door of the ONS 15454 M2 system.
#2 Phillips Dynamometric screwdriver
• DLP-G594 Open the Standard Door of the ONS 15454 M2 Shelf, on page
219.
• Connect the chassis to the office ground. For detailed instructions on how
to ground the chassis, refer to the
Guide for Cisco CPT and Cisco ONS Platforms
As needed
Onsite
None
Installing the ONS 15454 M2 Shelf
Electrostatic Discharge and Grounding
.