Ntp-G305 Unpack And Inspect The Ons 15454, Ons 15454 M2, And Ons 15454 M6 Shelves; Dlp-G676 Unpack And Verify The Ons 15454, Ons 15454 M2, And Ons 15454 M6 Shelves - Cisco ONS 15454 Hardware Installation Manual

NTP-G305 Unpack and Inspect the ONS 15454, ONS 15454 M2, and ONS 15454 M6 Shelves

Caution
Removing any active card from the shelf can result in traffic interruption. Use caution when replacing cards
and verify that only inactive or standby cards are being replaced. If the active card needs to be replaced, switch
it to standby prior to removing the card from the node. For traffic switching procedures, refer to the Cisco
ONS 15454 DWDM Configuration Guide.
Note An improper removal (IMPROPRMVL) alarm is raised whenever a card pull (reseat) is performed, unless
the card is deleted in CTC first. The alarm clears after the card replacement is complete.
NTP-G305 Unpack and Inspect the ONS 15454, ONS 15454 M2,
and ONS 15454 M6 Shelves
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Procedure
Step 1 Complete the
, on page
Step 2 Complete the
Step 3
Continue with the
Shelves, on page
Stop. You have completed this procedure.
DLP-G676 Unpack and Verify the ONS 15454, ONS 15454 M2, and ONS 15454
M6 Shelves
Purpose
Cisco ONS 15454 Hardware Installation Guide
20
Preparing to Install the ONS 15454 (ANSI and ETSI), ONS 15454 M2 and ONS 15454 M6 Shelf
This procedure explains how to unpack the ONS 15454, ONS 15454 M2, and
ONS 15454 M6 shelves and verify their contents.
Pinned hex (Allen) key for front door (ONS 15454 only)
None
Required
Onsite
None

DLP-G676 Unpack and Verify the ONS 15454, ONS 15454 M2, and ONS 15454 M6 Shelves

20.
DLP-G677 Inspect the ONS 15454, ONS 15454 M2, and ONS 15454 M6 Shelves, on page
NTP-G305 Unpack and Inspect the ONS 15454, ONS 15454 M2, and ONS 15454 M6
20.
This task removes the shelves from the package.
21.