Dlp-G597 Connect Office Power (Dc) To The Ons 15454 M2 Shelf (Ansi Only) - Cisco ONS 15454 Hardware Installation Manual

DLP-G597 Connect Office Power (DC) to the ONS 15454 M2 Shelf (ANSI Only)

Figure 162: Cable Clip to Secure the Power Cable
Step 4 Connect the power cable to the fuse panel or power source.
Note
Note
Step 5 Return to your originating procedure (NTP).
Table 30: PIDs for AC Power Cables
Cable
AC power cable - Japan right exit
AC power cable - China right exit
AC power cable - India right exit
AC power cable - EU right exit
AC power cable - ARG right exit
AC power cable - AUS right exit
AC power cable - UK right exit
AC power cable - KOR right exit
AC power cable ANSI 110VAC right exit
AC power cable ANSI 220VAC right exit
AC power cable for data center right exit
DLP-G597 Connect Office Power (DC) to the ONS 15454 M2 Shelf (ANSI Only)
Purpose
Cisco ONS 15454 Hardware Installation Guide
244
The voltage rating value for AC power ranges between 100 VAC to 240 VAC depending on the
standards in various countries.
Turn on the power after installing the power cables.
This task connects DC power to the ONS 15454 M2 shelf (ANSI Only).
PID
15454-M-CBL-R-JPN=
15454-M-CBL-R-CHI=
15454-M-CBL-R-IND=
15454-M-CBL-R-EU=
15454-M-CBL-RARG=
15454-M-CBL-RAUS=
15454-M-CBL-R-UK=
15454-M-CBL-RKOR=
15454-M-ACCBL-R=
15454-M-ACCBL-R2=
15454-M-ACL6-R=
Installing the ONS 15454 M2 Shelf