Dlp-G604 Install The Tnc, Tnce, Tsc, Or Tsce Card - Cisco ONS 15454 Hardware Installation Manual

Hide thumbs Also See for ONS 15454:
Table of Contents

Advertisement

DLP-G604 Install the TNC, TNCE, TSC, or TSCE Card

Warning
During this procedure, wear grounding wrist straps to avoid ESD damage to the card. Do not directly
touch the backplane with your hand or any metal tool, or you could shock yourself. Statement 94
Caution
Always use the supplied ESD wristband when working with a powered ONS 15454 M2 and ONS 15454 M6
shelf assemblies. For detailed instructions on how to wear the ESD wristband, refer to the
Discharge and Grounding Guide for Cisco CPT and Cisco ONS
Note
If you install a card incorrectly, the FAIL LED flashes continuously.
Procedure
Step 1
Complete the
Note
Step 2
Complete the
Step 3
Complete the
Stop. You have completed this procedure.
DLP-G604 Install the TNC, TNCE, TSC, or TSCE Card
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Cisco ONS 15454 Hardware Installation Guide
262
DLP-G604 Install the TNC, TNCE, TSC, or TSCE Card, on page
If you install the wrong card in a slot, see the
Replace DWDM Cards
.
DLP-G605 Provision PPM and Port for the TNC and TNCE Cards, on page
DLP-G606 Configure UDC and VoIP for the TNC and TNCE Cards, on page
(ONS 15454 M2 and ONS 15454 M6 only) This task installs redundant
TNC/TNCE/TSC/TSCE/TNCS-2/TNCS-2O cards on the ONS 15454 M6 shelf
and a stand-alone TNC/TNCE/TSC/TSCE/TNCs-2/TNCS-2O card on the ONS
15454 M2 shelf. Install and initialize the
TNC/TNCE/TSC/TSCE/TNCS-2/TNCS-2O card before installing any other line
cards into the shelf assemblies. On the ONS 15454 M6 shelf, install the
TNC/TNCE/TSC/TSCE/TNCS-2/TNCS-2O cards in slots 1 and 8 for redundancy.
On the ONS 15454 M2 shelf, install the stand-alone
TNC/TNCE/TSC/TSCE/TNCS-2/TNCS-2O card in slot 1.
Two TNC/TNCE/TSC/TSCE/TNCS-2/TNCS-2O cards for the ONS 15454 M6
shelf and one TNC/TNCE/TSC/TSCE/TNCS-2/TNCS-2O card for the ONS 15454
M2 shelf
None
Required
Onsite
Installing the ONS 15454 M2 Shelf
Platforms.
262.
NTP-G107 Remove Permanently or Remove and
Electrostatic
265.
266.

Advertisement

Table of Contents
loading

Table of Contents