Table of Contents
Advertisement
Overview
This chapter contains the following topics:
•
Cisco UCS X210c M6 Compute Node Overview
The Cisco UCS X210c M6 is a single-slot compute node that supports two CPU sockets for Intel 3rd Generation
Xeon CPUs. The compute node supports the following features with one or two identical processors installed:
• 32 DDR4 DIMMs (16 DIIMMs per CPU)
• One front mezzanine module which can support either of the following:
• 1 modular LAN on motherboard (mLOM) module.
• 1 rear mezzanine module
• A mini-storage module socket for one M.2 module with slots for two M.2 drives.
• Up to 8 UCS X210c M6 compute nodes can be installed in a Cisco UCS X9508 modular system.
Compute Node Front Panel
The Cisco UCS X210c M6 front panel contains system LEDs that provide visual indicators for how the overall
compute node is operating. An external connector is also supported.
Cisco UCS X210c M6 Compute Node Overview, on page 1
• one front storage module, which supports multiple different storage device configurations:
• Up to six SAS/SATA RAID-compatible drives connected over PCIe with the rest of the compute
node. RAID levels 0, 1, 5, 6, 10, and 50 are supported.
• Up to six NVMe drives.
• A mixture of up to six SATA/SATA or NVMe drives is supported.
C H A P T E R
Cisco UCS X210c M6 Compute Node Installation and Service Note
1
1
Advertisement
Table of Contents
