Unpack And Inspect The Server - Cisco SNS 3515 Manual

Install Cisco ISE Software on the SNS 3515 and SNS 3595 Appliances
• Ensure that the air-conditioning meets the thermal requirements listed in the
• Ensure that the cabinet or rack meets the requirements listed in the
• Ensure that the site power meets the power requirements listed in the
Caution Avoid UPS types that use ferroresonant technology. These UPS types can become unstable with systems
such as the Cisco UCS, which can have substantial current draw fluctuations from fluctuating data traffic
patterns.

Unpack and Inspect the Server

When handling internal server components, wear an ESD strap and handle modules by the carrier edges
Caution
only.
Note Keep the shipping container in case the server requires shipping in the future.
The chassis is thoroughly inspected before shipment. If any damage occurred during transportation or any
Note
items are missing, contact your customer service representative immediately.
To inspect the shipment:
Step 1 Remove the server from its cardboard container and save all packaging material.
Step 2 Compare the shipment to the equipment list provided by your customer service representative and the list given below.
Verify that you have all items.
Step 3 Check for damage and report any discrepancies or damage to your customer service representative. Have the following
information ready:
• Invoice number of shipper (see the packing slip)
• Model and serial number of the damaged unit
• Description of damage
page 13.
15. If available, you can use an uninterruptible power supply (UPS) to protect against power failures.
Cisco Identity Services Engine Hardware Installation Guide, Release 2.0.1
Unpack and Inspect the Server
Server Specifications, on
Rack Requirements, on page
Power Specifications, on page
13.
11