System Control - Tunstall FlamencoIP Technical Manual

3. Necessary previous knowledge
3.2

System control

3.2.1 IP-SystemManager
The nurse call system is controlled through several decentralised IP-SystemManag-
ers. Through an IP network (LAN), all IP-SystemManagers of the nurse call system
communicate with each other and with external devices or systems (e.g., IPBX) con-
nected to the nurse call system through the IP network..
Fig. 3: IP-SystemManager (76 2100 00)
All IP-SystemManagers are equipped with uniform hardware.
The same project-specific database containing the nurse call system's configuration
is stored on all IP-SystemManagers.
The IP-SystemManagers differ through the factory-set operating mode.
3.2.2 Operating modes
he IP-SystemManagers differ through the factory-set operating mode. The operating
mode was factory-set according to the odered functional scope of the nurse call sys-
tem. You cannot change the operating mode.
The operating mode provides functions and enables the IP-SystemManager connec-
tions required for these functions. The following operating modes are possible:
Operating mode
System
Local
System + Local
BMA/MED
10
Operation purpose
Speech communication of the nurse call system, manage-
ment and coordination of cross-group functions, display of
faults in the nurse call system.
Control of the nurse call operation of one ward, connection
of the OSYnet group bus of the ward.
The "System" and "Local" modes in one IP-SystemMan-
ager.
Activation of an medical electrical system (MED) or fire
alarm system (BMA).
Flamenco
IP
- Technical Manual - 00 8813 52, 03/18 (Rev. 1.0)