Light Control - Tunstall FlamencoIP Technical Manual

The Flamenco
ing the patient units. For this purpose the connection sockets are equipped with ap-
propriate outputs.
Connection socket
combi
Connection socket
combi, bedhead
unit
Connection socket
combi, TVL
Connection socket
combi, bedhead
unit, TVL
Connection socket
with call switch
Connection socket
with call switch,
bedhead unit
Tab. 5: Connection sockets and patient units for light control
The switching outputs provide an output voltage of 24 V DC and an output current of
max. 200 mA, sourced from the nurse call system power supply. The potential refers
to the 0 V connections of the nurse call system. The outputs prepare a switching
pulse (24 V DC, max. 200 mA) for as long as the button on the patient unit is held
down (pear push switch or patient handset).
The light relays to be used must meet the requirements specified in the following sec-
tions.
 refer to chapter 12.1 "Application: Switching the light on/off (without dimming)" on
page 66.
 refer to chapter 12.2 "Application: Dimming the light" on page 67.
IP
Flamenco - Technical Manual - 00 8813 52, 03/18 (Rev. 1.0)

12. Light control

IP
nurse call system offers the patient the possibility to switch lights us-
Pear push switch incl.
Order no. call and light switch
(Best.-Nr. 70 0710 0x)
70 0424 00,  Switching on/off one
70 0425 00
70 0434 00,
70 0435 00
 Dimming one light
70 0424 50,
70 0425 50
70 0434 50,
70 0435 50
70 0171 60...  Switching on/off one
70 0171 50
 Dimming one light
light source (room
light or reading light)
without dimming
source (room light or
reading light)
light source (room
light or reading light)
without dimming
source (room light or
reading light)
Patient handset
(order no.
74 0747 00)
 Switching on/off
two light sources
(room light and
reading light) with-
out dimming
 Dimming two light
sources (room light
and reading light)
-
65