Table of Contents
Advertisement
Power supply unit UPS (77 3400 00)
5
Mounting
The power supplyunit UPS is designed for wall mounting using the mounting ma-
terial supplied with it. You should check the mounting wall beforehand to verify
whether it is suitable for fixing the power supply onto it:
Weight of the power supply unit UPS: 8.5 kg,
Dimensions: 244 x 325 x 178 mm.
Insufficient air convection may result in the power supply unit being destroyed.
For this reason, you must observe the following points:
The ventilation openings on the device must be located at the top and bot-
tom.
You must ensure that air can circulate sufficiently above and below the de-
vice. Therefore, there must be a distance of at least 50 mm between the de-
vice and other devices or walls.
Do not cover the ventilation outlets under any circumstances.
Fig. 1: Dimensional drawing
Power supply unit UPS (77 3400 00) – Instruction manual – 00 8802 41, 04/16 (Rev. 9.0)
Product leaflets 03/2018, page 92
Mounting
│10
Advertisement
Chapters
Table of Contents
