Connections And Commissioning - Tunstall FlamencoIP Technical Manual

Netzgerät (77 3401 00)
6

Connections and commissioning

Fig. 2: Connections, fuses and LED displays
1 LED displays
Signalling outputs
2 Plug-in screw-type terminal, 7-pole
(spare part order no.: 00 0211 39)
Output fuse F2: FKS 15A
3
(spare part order no.: 00 0132 02)
24 V connection
4 Plug-in screw-type terminal, 4-pole
(spare part order no.: 00 0211 41)
Tab.1: Connections, fuses and LED displays
6.1.1 Output terminals (4) 24 V DC / 12 A
The power supply unit UPS provides a controlled output voltage of 24 V DC, max.
12 A.
If a load current of approximately 12 A is exceeded, the output voltage reduces at
a constant current according to the resistance value of the connected overload.
Connect the load to terminals „+24 V" and „0 V" (provided twice).
6.1.2 Signalling outputs (2) and LED displays (1)
The signalling outputs and the LED displays indicate the device status. The sig-
naling outputs use potential-free relay contacts to indicate the device status.
Power supply unit (77 3401 00) – Instruction manual – 00 8802 42, 04/16 (Rev. 7.0)
Connections and commissioning
Mains fuse F1: (20 x 5) T 5A
5
(spare part order no. 00 0130 41)
Cable screw gland for
6
mains connection cable
Mains supply
7 Plug-in screw-type terminal, 3-pole
(spare part order no. 00 0211 40)
Product leaflets 03/2018, page 108
│9