5.4.5
Required ports to open for remote maintenance
Remote access by Tunstall is done via VPN access or directly via TeamViewer.
The following ports are required for remote maintenance, depending on the access:
Access
TeamViewer
For troubleshooting via remote maintenance, e. g. for pinging devices, the Internet
Control Message Protocol (ICMP) must be enabled or temporarily enabled in the net-
work.
IP
Flamenco
- Technical Manual - 00 8813 52, 03/18 (Rev. 1.0)
Protocol
Port
TCP (UDP)
80/443/(5938)
5. IP network
33