Radio Call Devices - Tunstall FlamencoIP Technical Manual

14. Servicing
14.8

Radio call devices

Functions
Radio receiver-T
plug-in connection to connection socket
Recommendation of the manufacturer:
Weekly inspection with test call reception
under observance of the display elements
and call forwarding. If radio reception interfer-
ence is suspected, the radio range must be
checked as during initial start-up.
 Are the housing, connection cable and
plug undamaged and free of contamina-
tion?
 Does the LED indicator show a fault? If so,
remedy the fault. Example: If the LED on
the radio receiver flashes red, the battery
of an assigned radio transmitter is low.
Make sure the battery is changed.
 Function test according to the provided
documentation of the manufacturer
MyAmie
to be assigned to radio receiver-T
Recommendation of the manufacturer of the
radio receiver-T: Weekly inspection with test
call reception under observance of the dis-
play elements and call forwarding.
 Are the housing and button undamaged
and free of contamination?
 Replace the neck cord or wrist strap ac-
cording to the hygiene regulations of the
hospital.
 Can a call be triggered by pressing the call
button?
 Does the red LED light up after the call
button is pressed? If it flashes, the battery
is low. Replace MyAmie.
 Check whether MyAmie works across the
entire intended area of application (range
test).
92
Order no.
Z 00 8202 33
P68007/02
IP
Flamenco - Technical Manual - 00 8813 52, 03/18 (Rev. 1.0)