Section 5 Installing; Mounting Modules - ABB Remote I/O RIO600 Installation And Commissioning Manual

1MRS757488 H
Section 5
5.1
RIO600
Installation and Commissioning Manual
Installing

Mounting modules

RIO600 is designed to be mounted on the standard DIN rail. The modules can be easily
stacked and removed.
1. Mount the modules on the DIN rail.
• The modules can be stacked in the DIN rail as per configuration and in a
predefined order depending on the module type.
• After the power supply and communication modules are mounted, the
order of the DIM8H/DIM8L/DOM4/RTD4/AOM4/SIM8F/SIM4F/
SCM8H/SCM8L modules is user configurable.
Mount the RTD4 module in the extreme right side to provide optimally short
grounding arrangement to the RTD cable shields.
Table 5: Predefined order of the modules
Number of power supply modules
1
2
2. Plug in the rubber caps on the first and the last module in the stack.
3. Install the end clamps at the first and the last module in the stack.
4. Connect the Ethernet cable before connecting the auxiliary power.
Order of different modules
1.1. PSMH or PSML
1.2. LECM
1.3. DIM8H, DIM8L, DOM4, RTD4, AOM4, SIM8F,
SIM4F, SCM8H or SCM8L
1.1. PSMH or PSML
1.2. PSMH or PSML
1.3. LECM
1.4. DIM8H, DIM8L, DOM4, RTD4, AOM4, SIM8F,
SIM4F, SCM8H or SCM8L
Section 5
Installing
25